Part Number Hot Search : 
DS12R885 TLHG5100 MJE4350 57256A 5R250 10203 DS1587 IRF1010
Product Description
Full Text Search
 

To Download MC12053A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Order Freescale Semiconductor, Inc. this document by MC12053A/D
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
1.1 GHz Super Low Power Dual Modulus Prescaler With Stand-By Mode
MC12053A
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
8 1
* * * * * *
Supply Voltage of 2.7 to 5.5 V Low Power 1.5 mA Typical at VCC = 2.7 V Operating Temperature Range of -40 to 85C On-Chip Output Termination The MC12053A Is Pin and Functionally Compatible With the MC12036 Modulus Control Input Level Is Compatible With Standard CMOS and TTL PIN CONNECTIONS
D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8)
MOSAIC V is a trademark of Motorola
FUNCTIONAL TABLE
SW H H L L MC H L H L Divide Ratio 64 65 128 129 IN VCC SW OUT
1 2 3 4 8 7 6 5
IN SB MC Gnd
(Top View)
NOTES: 1. SW: H = VCC - 0.5 to VCC, L = Open. A logic L can also be applied by grounding this pin, but this is not recommended due to increased power consumption. 2. MC & SB: H = 2.0 V to VCC, L = Gnd to 0.8 V.
MAXIMUM RATINGS
Characteristic Power Supply Voltage, Pin 2 Operating Temperature Range Storage Temperature Range Modulus Control Input, Pin 6 Maximum Output Current, Pin 4
NOTE: ESD data available upon request.
Symbol VCC TA Tstg MC IO
Range -0.5 to 7.0 -40 to 85 -65 to 150 -0.5 to VCC 4.0
Unit Vdc C C Vdc mA Device MC12053AD
ORDERING INFORMATION
Operating Temp Range TA = -40 to 85C Package SO-8
(c) Motorola, Inc. 1998
Rev 5
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
1
Go to: www.freescale.com
ARCHIVE INFORMATION
The MC12053A is a super low power /64/65, /128/129 dual modulus prescaler. Motorola's advanced Bipolar MOSAICTM V technology is utilized to achieve low power dissipation of 4.3 mW at a minimum supply voltage of 2.7 V. The Divide Ratio Control input, SW, permits selection of divide ratio as desired. A HIGH on SW selects /64/65; an OPEN on SW selects /128/129. The Modulus Control input, MC, selects the proper divide number after SW has been biased to select the desired divide ratio. Stand-by mode is featured to reduce current drain to 50 A typical at 2.7 V when the stand-by pin, SB, is switched LOW, disabling the prescaler. On-chip output termination provides 500 A (typical) output current, which is sufficient to drive a CMOS synthesizer input high impedance load (8.0 pF typical). * 1.1 GHz Toggle Frequency
MECL PLL COMPONENTS /64/65, /128/129 LOW POWER DUAL MODULUS PRESCALER WITH STAND-BY MODE
SEMICONDUCTOR TECHNICAL DATA
Freescale Semiconductor, Inc. MC12053A
ELECTRICAL CHARACTERISTICS (VCC = 2.7 to 5.5 V; TA = -40 to 85C, unless otherwise notex.)
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Toggle Frequency (Sine Wave Input) Supply Current Output (Pin 2) Stand-By Current Modulus Control & Stand-By Input HIGH (MC & SB) Modulus Control & Stand-By Input LOW (MC & SB) Divide Ratio Control Input HIGH (SW) Divide Ratio Control Input LOW (SW) Output Voltage Swing (Note 1) VCC = 2.7 V VCC = 5.0 V VCC = 2.7 V VCC = 5.0 V
Characteristic
Symbol ft
Min 0.1 - - - - 2.0 Gnd VCC - 0.5 Open 0.8 - 100 400
Typ 1.4 1.60 1.75 50 100 - - VCC Open 1.1 11 - -
Max 1.1 2.5 2.5 250 250 VCC + 0.5 0.8 VCC + 0.5 Open - 16 1000 1000
Unit GHz mA A V V V
ICC ISB VIH1 VIL1 VIH2 VIH2 Vout tset
Vpp
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
Input Voltage Sensitivity
NOTE: Assumes 8.0 pF high impedance load.
250-1100 MHz 100-250 MHz
Vin
mVpp
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Figure 1. Logic Diagram (MC12053A)
Figure 2. Modulus Setup Time
D A C
Q
D B
Q
D C
Q QB
Prop. Delay In
QB
C
QB
CM
In In Out MC SB MC Setup MC Release Out Modulus setup time MC to out is the MC setup or MC release plus the prop delay. MC
D D C
Q
D
QB E
D F
Q
D
QB G
D H
QB
QB
C
Q
C
QB
C
Q
C SQ
SW
Figure 3. AC Test Circuit VCC = 2.7 to 5.5 V C3 Sine Wave Generator C1 50 C2 IN MC GND IN VCC SW SB OUT CL
EXTERNAL COMPONENTS C1 = C2 = 1000 pF C3 = 0.1 F CL = 8.0 pF (Including Scope and jig capacitance)
MC Input
2
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA Go to: www.freescale.com
ARCHIVE INFORMATION
Modulus Setup Time MC to OUT at 1100 MHz
ns
Freescale Semiconductor, Inc. MC12053A
Figure 4. Input Signal Amplitude versus Input Frequency
+15.0 ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 +10.0 +5.0 0 -5.0 AMPLITUDE (dBm) -10.0 -15.0 -20.0 -25.0 -30.0 -35.0 -40.0 -45.0 -50.0 0 200 400 600 800 1000 1200 1400 1600 FREQUENCY (MHz) Divide Ratio = 64; VCC = 2.7 V; TA = 25C +1257.40 +707.11 +397.64
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
+3.98 +2.24 +1.26 +0.71 1800
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Figure 5. Output Amplitude versus Input Frequency
2000 1600 mVpp 1200 800 400 0 1800
0
200
400
600
800
1000
1200
1400
1600
FREQUENCY (MHz)
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
3
Go to: www.freescale.com
ARCHIVE INFORMATION
EEEEEEEEEEEEEEE EEEEEEEEEEEEEEE EEEEEEEEEEEEEEE EEEEEEEEEEEEEEE EEEEEEEEEEEEEEE
OPERATING WINDOW
+223.61 +125.74 +70.71 mVrms +39.76 +22.36 +12.57 +7.07
Freescale Semiconductor, Inc. MC12053A
Figure 6. Typical Input Impedance versus Input Frequency
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 300
200 R 100 0 -100 -200 -300 OHMS -400 -500 -600 -700 -800 jX -900 -1000 -1100 -1200 100
MHz
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
200
300
400
500
600
700
800
900
1000
1100
1200
4
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA Go to: www.freescale.com
ARCHIVE INFORMATION
Freescale Semiconductor, Inc. MC12053A
OUTLINE DIMENSIONS
D SUFFIX ARCHIVED BY FREESCALE SEMICONDUCTOR, PACKAGE INC. 2005 PLASTIC CASE 751-06 (SO-8) ISSUE T C
5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_
A
8
D
E
1 4
H
0.25
M
B
M
h B C e A
SEATING PLANE
X 45 _
q
ARCHIVE INFORMATION
Freescale Semiconductor, Inc...
L 0.10 A1 B 0.25
M
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
CB
S
A
S
q
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
MOTOROLA RF/IF DEVICE DATA For More Information On This Product, Go to: www.freescale.com
MC12053A/D 5
ARCHIVE INFORMATION


▲Up To Search▲   

 
Price & Availability of MC12053A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X